Mold release agent TMJ - JC
Metal Die Casting release agent · Product Introduction
Product features
| Feature description |
| This product is a metal die-casting release agent. Compared with the existing metal die-casting release agents, it features low cost, no odor, excellent demolding performance and no carbon deposits or blackening. This product can form an effective protective barrier between the molten metal and the mold surface, facilitating the smooth demolding of castings while ensuring the integrity of the parts and compatibility with subsequent processing such as painting. |
| High-efficiency demolding: A uniform and dense high-temperature protective film is formed on the mold surface, providing excellent lubricity and separability, ensuring smooth demolding of die-castings and effectively preventing defects such as sticking and scratches. |
| Minimal carbon deposits: With a scientific formula, low organic matter content, and minimal decomposition residue at high temperatures, it can significantly reduce carbon deposits on the mold surface, extend the mold cleaning cycle, and maintain the mold's precision and smoothness. |
| Stability: The emulsion state is stable and can be stored for a long time. |
Basic indicators
| Project |
Indicator |
| Appearance |
Milky white liquid with a bluish tint |
| Density (g/cm³, 25℃) |
0.94 to 0.98 |
| pH value (25℃ |
8 ~ 10 |
| Particle size (nm |
100 ~ 150 |
| Surface tension (mN/m |
27 ~ 33 |
| Conductivity (μS/cm) |
980 ~ 1700 |
Recommended dosage
| Usage ratio instructions |
| Before use, please shake the original solution thoroughly. It is recommended to dilute it in a ratio of mold release agent original solution to water of 1:50-150. Slowly add this mold release agent to the water and stir constantly to ensure thorough and uniform mixing. It is recommended to use an automatic proportioning system to ensure the stability of the dilution solution concentration. The specific proportioning can be adjusted according to the actual situation. |
Precautions
| Explanation of Matters |
| The lid of the mold release agent that has not been used up should be tightened to prevent water and impurities from mixing in. Before use, please ensure that the mold surface is clean, free of oil stains, residues of old mold release agents or carbon deposits. |
Storage and transportation
| Project |
Explanation |
| Storage conditions |
Store in a sealed container in a cool and dry place |
| Shelf life |
One year from the date of production |
Product specification
| Packaging instructions |
| Packed in 25kg and 200kg drums or as per customer's customized packaging. |
