产品详情
Fully synthetic cutting fluid McF-03
Fully synthetic Metal Cutting Fluid · Product Introduction
Product features
| Feature description |
|---|
| This product is a fully synthetic cutting fluid, which refers to a metalworking fluid that contains no oil and is entirely made from chemical raw materials. Compared with traditional emulsified oil, its advantages lie in: |
| Control costs; Compared with traditional emulsified oil, using fully chemically synthesized raw materials makes the cost more controllable and the price fluctuates less with changes in the oil market. |
| Environmentally friendly and clean, with stable properties; Traditional emulsified oil is prone to demulsification during use, which leads to the growth of anaerobic microorganisms and the rancidity and stench of the working fluid. There are also problems such as the difficulty in subsequent waste oil treatment. Fully synthetic cutting fluids have good stability, are less likely to have demulsification problems, and the workpieces are easy to clean, making them more environmentally friendly and green. |
| Superior lubrication: By choosing the appropriate synthetic grease as the main lubricating component, the lubrication performance can be significantly enhanced. |
Basic indicators
| Project | Indicator |
|---|---|
| Appearance | Yellow liquid |
| Density (g/cm³, 25℃) | 1.00～1.04 |
| pH value (10% aqueous solution) | 8.5～9.5 |
| Chemical Oxygen Demand COD (mg/L | P 1200000 |
Recommended dosage
| Usage ratio instructions |
|---|
| It is recommended to dilute the cutting fluid at a ratio of 200-600L of pure water for every 1L and directly add it to the cylinder (adjustments can be made according to the actual situation). |